Cisco ASA Licence upgrade

Check for the existing licences on your Firewall:

#show ver

.

.

Licensed features for this platform:
 Maximum Physical Interfaces : Unlimited perpetual
 Maximum VLANs : 50 perpetual
 Inside Hosts : Unlimited perpetual
 Failover : Disabled perpetual
 Encryption-DES : Enabled perpetual
 Encryption-3DES-AES : Enabled perpetual
 Security Contexts : 0 perpetual
 GTP/GPRS : Disabled perpetual
 AnyConnect Premium Peers : 2 perpetual
 AnyConnect Essentials : Disabled perpetual
 Other VPN Peers : 250 perpetual
 Total VPN Peers : 250 perpetual
 Shared License : Disabled perpetual
 AnyConnect for Mobile : Disabled perpetual
 AnyConnect for Cisco VPN Phone : Disabled perpetual
 Advanced Endpoint Assessment : Disabled perpetual
 UC Phone Proxy Sessions : 2 perpetual
 Total UC Proxy Sessions : 2 perpetual
 Botnet Traffic Filter : Disabled perpetual
 Intercompany Media Engine : Disabled perpetual
 IPS Module : Disabled perpetual
 Cluster : Disabled perpetual

This platform has a Base license.

Serial Number: FCHS208DWST
 Running Permanent Activation Key: 0x20dfsdf 0x48dfsf 0x3sdfdf 0xegfdg 0xsdfdff
 Configuration register is 0x1

!
 !

Now perform following steps and key-in the activation key provided by the Cisco when purchased the new release.

 HO-Markhorr-KHI-FW01(config)# activation-key 000sdfs 1c42dfsfsd fddfsfsd asdfsdsf
 Validating activation key. This may take a few minutes...
 Failover is different.
 running permanent activation key: Restricted(R)
 new permanent activation key: Unrestricted(UR)
 WARNING: The running activation key was not updated with the requested key.
 Proceed with update flash activation key? [confirm]
 The flash permanent activation key was updated with the requested key,
 and will become active after the next reload.
 HO-Markhorr-KHI-FW01(config)#
 HO-Markhorr-KHI-FW01(config)#
 HO-Markhorr-KHI-FW01(config)# wr
 Building configuration...
 Cryptochecksum: 5e648459 ea268bf2 20d92ce8 7709071b

21647 bytes copied in 0.730 secs
 [OK]
 HO-Markhorr-KHI-FW01(config)#
 HO-Markhorr-KHI-FW01(config)#
 HO-Markhorr-KHI-FW01(config)#
 HO-Markhorr-KHI-FW01(config)# reload
 Proceed with reload? [confirm]
 HO-Markhorr-KHI-FW01(config)#
 ***
 *** --- START GRACEFUL SHUTDOWN ---
 Shutting down isakmp
 Shutting down sw-module
 Shutting down License Controller
 Shutting down File system

***
 *** --- SHUTDOWN NOW ---
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s